Emma Pendant

Chloe 5 ring (Not the Emma)

Let me start with the end result. I love the fixture. It is clean, modern and produces good light. I have a few suggestions/observations though. The instructions did not match the fixture. Both the sheet and the online video placed the smallest ring in the middle of the largest one. However the spacing of the derrick holes on the rings on the base plate made it obvious, that the smallest ring goes to the side. It is also the case that the smallest ring is the lowest (using the longest derricks), while the instructions shows the second smallest right with the longest derricks. It looks to me, that at a certain point the design was changed and the instructions were not updated. The metal plate, that is to be fixed to the electrical box is way too flimsy. The arms bend under the weight of the light, which makes it hard to properly tighten the screws while fitting in the slot on the base plate. I suggest doubling the thickness of the arms. The thread of the derricks was rusty. I suggest applying some lubrication on the threads after manufacture. Provide a 2 ft long picture hanging string, which is to be mounted on the base plate, and then used to secure the fixture to the ceiling plate. That way it is easier to connect the wires if you have to do the work without a helper. Holding the fixture up, while connecting the wires is not possible for one person. I also suggest a bit longer connection wires, so the picture can be held (or hung) lower while connecting the wires.